| JD16T |
 |
Features |
Robust unit designed for a long and active life. Casing of epoxy powder coated aluminium. See extended description for more detail. |
Flow Range |
8-18 lts min |
Flow Control |
+/- 2.5% |
| Pressure Drop |
|
| Battery Pack |
Twin NiMh |
| Charge Time |
7 hrs |
| Run Time |
4-4.5hrs at 16 lt/min or 6-6.5hrs at 8 lt/min |
| Display |
Elapsed Run Time |
| Weight |
4.25kg |
| Operating Temp |
|
Intrinsically Safe
Approvals |
|
Extended Description |
| JS12000 |
 |
Features |
Fully featured air sampling unit with three operating modes. Manual mode: Pump runs continuously displaying elapsed time. Timed Mode: Set sampling period, pump will run and then turn off. Delayed Start: Unit programmed to run at a date and time specified, run for selected duration and shut down. The JS12000's onboard memory stores settings for convenience. Flow rate fully adjustable, stabilised by electronic flow control circuit. |
Flow Range |
Up to 20lts/min free air. |
Nominal Flow |
0.8 micron filter 12.5lt/min |
Battery Pack |
12v Lead Acid |
| Charge Time |
10-14hrs |
| Run Time |
Dependant on load and battery condition. |
| Display |
Elapsed time |
| Weight |
|
| Operating Temp |
|
Intrinsically Safe
Approvals |
|
|
| JS16000 + Timer Unit |
|
Features
|
For use at higher flow rates, free air flows up to 30lt/min, but still compact in size. Stable flow at sampling set point to +/- 5% using advanced electronic control circuitry. Maximum run time with full good condition battery is 5 hours, Flow rate adjustable by potentiometer on front panel. |
Flow Range |
Up to 30lt/min free air. |
Nominal Flow |
1.2 micron filter 20lt/min |
Battery Pack |
12v Lead Acid battery pack |
Charge Time |
10-14hours |
Run Time |
5 hours |
Display |
Elapsed time |
| Weight |
|
| Operating Temp |
|
Intrinsically Safe
Approvals |
|
|
| SKC MCS 10 |
 |
Features |
Well made unit, fully programmable timer, with flow set memory, timer. Can run with mains power connected. |
Flow Range |
3-12 lts min |
Flow Control |
Micro-Processor+/- 5% of set point, full operating range |
| Pressure Drop |
|
| Battery Pack |
7 Amp/Hr Lead Acid/ /Cad Battery |
| Charge Time |
10-14 hrs |
| Run Time |
Dependant on load and battery condition. |
| Display |
Run Time/ Hold Function,
Set Parameters |
| Weight |
|
| Operating Temp |
Operating –5c to 50c
Storage
Charging |
Intrinsically Safe
Approvals |
|
|
| SKC MCS Flite |
 |
Features |
Well made unit, fully programmable timer, with flow set memory, timer. Can run with mains power connected. High flow rate, longer run times. |
Flow Range |
3-20 lts min 16.7 lts/min through 47mm Teflon filter |
Flow Control |
Micro-Processor+/- 5% of set point, full operating range |
| Pressure Drop |
|
| Battery Pack |
12 Amp/Hr Lead Acid/ /Cad Battery |
| Charge Time |
10-14 hrs |
| Run Time |
Dependant on load and battery condition. |
| Display |
Run Time/ Hold Function,
Set Parameters |
| Weight |
6.5Kg |
| Operating Temp |
Operating -5c to 45c
Storage
Charging |
Intrinsically Safe
Approvals |
|
|
| Mast |
Standard mast has screw filter head fitting.
Quick release filter head fitting, ideal for clearance work or if the head has to be changed quickly, esp. when wearing gloves.
The quick release assembly is available as a kit for modifying existing masts.
The mast is in two sections. With both sections attached the head is positioned at the correct height according to the requirements of MDHS39/4 with the sampler stood on the floor. The top section alone positions the head correctly with the sampler stood on a desk or similar.
A one piece mast is also available.
The mast fits Pascal PAS1600 and PAS800 samplers. Many other makes can have the inlet changed to fit this mast.
Please note sampler and filter head are shown for illustration and are not included with the mast or quick release kit.
|
| Accessories |
|
 Our own simple but effective design of a sample mast, utilising 300mm tubular aluminium sections slotted together, simple lightweight and easy to use adjustable height mast, supporting filter head as directed in HSG248.
Client can add or remove sections, as site conditions determine.
1x Complete assembly with 4 sections :
(1.2mt) filter support bracket
£15.00 ex Vat.
Additional sections of mast
£3.00 each ex Vat. |
|
 |
